Language

1

машин

Упаковочная линия.

Контактная информация.

Cindy

Tel:0086 139 5120 0080
E-mail:cindy@ztpack.net
cindy-hejiehua@qq.com

Fiona

Tel:0086-136 8527 0809
E-mail:fiona@ztpack.net

Адрес: 1616, южная и восточная дорога на голден-тан, чанджу, провинция цзянсу

FXZ-160B Full-Automatic Linear capping machine

категория:

Linear Capping Machine

сообщен

Видео продукции

Описание продукции

Full-Automatic linear Capping Machine

The automatic capping machine allows for continuous capping of screw type caps on an automated packaging system. Standard automatic spindle capper is comprised of threes modules: cap tightener, cap chute, and cap sorting device either centrifugal or vibratory depending on cap types. Cap sorting device orients the caps into position for its final entry into the chute, then the caps enter the chute. The pick off head holds the caps in a specific location where they are placed on the bottles as they pass by. Each cap is held by stainless steel fingers as it waits for a bottle. As the bottle advances on a conveyor, the neck of the bottle catches the edge of the cap and drags it out of the pick off head with a leveling action assisted by the leveling plate, which is made custom per cap size. A stabilizer bar keeps the cap in place as the container begins to move through the capper. Caps passing through the spindle capper are threaded down by sets of tightening spindles. Each set of spindles on the spindle capper will tighten the cap onto the container until the ideal torque is met. Tightening spindles can be raised or lowered to accomodate different size containers. Similarly, the spindle capper allows the gap between the sets of spindles to be widened or narrowed, again allowing the capping machine to handle a range of container widths.

Key Features

Place and torque a wide range of cap types including

Flat caps,oval caps, flip top caps, pull spouts, safety caps, children proof caps, sport caps, over-caps with induction seals

Handle a variety of bottle types including PET, PP, PVC, HDPE, LDPE, and Glass as well as various shapes and sizes

Heavy duty stainless steel 304 frame construction and anodized aluminum components

C-frame design rolls up to existing conveyor

Vibratory or centrifugal for option depending on caps

A optional cap elevator used to increase efficiency

Variable speed drive controls for spindle wheels and gripper belts

Stainless steel cap chute, tool-less for ease of changeover

A cap stabilizer to assist in starting caps

Gripper belt assembly with adjustable bottle gripper belts

Six tightening spindles (three sets)

Individually adjustable spindles with locking knobs

Power height adjustment for different bottle heights

Tool free changeover for different bottle and cap sizes

Caster mounted for portability with vibration resistant levelers

Easy removable body access panels

No capping machine operator necessary once caps are in sorting device

Technical Specifications

Capacity	≤7000BPH	4500BPH
Bottle Diameter	Φ35-140mm	Φ50-100mm
Bottle Height	50-300mm	50-200mm
Cap Diameter	Φ15-70mm	Φ30-100mm
Air Pressure	0.6-0.8Mpa	0.6-0.8Mpa
Voltage	AC 220V 50/60HZ	AC 220V 50/60HZ
Power Consumption	1.5KW	1.5KW
Weight(Approx)	750KGS	650KGS
Dimension	2000(L) x 930(W) x 2100(H)mm	2000(L) x 930(W) x 2100(H)mm

Specifications are subject to change without notice, All rights are reserved.

main technical parameter

1.Capacity	≤8000(b/h)
2.applicable bottle diameter	35-140mm
3.applicable bottle height	50-300mm
4.cap diameter	15-70mm
5.air pressure	0.6-0.8Mpa
6.voltage	AC220V,50/60Hz
7.total power	1.5Kw
8.net weight	750kg
9.dimension	2000(L)×930(W)×2100(H)mm

FXZ-120C Linear Irregular lid capping machine

Single Head Full Automatic Capping Machine